Hot High Pressure Cleaner

The hot water high-pressure cleaner is the best tool for tough or non water-soluble dirt removal. Suitable for different uses and ideal in several sectors like agriculture, food industry and primary and secondary building.

Excellent for machines washing like:
tools, engines, farm tractors and means of transport (oily dirt) removal or animal and vegetable residuals (stables and food industry), washing of heavy building equipments (cement mixers, cranes, earth-moving equipments etc.). In the food industry has a perfect hygienising effect.

Distributor alat-alat dan mesin klining Lavor pro

• Linear Pump :
The movement of the (3) pistons occurs through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates and it has a better self priming.

Distributor alat-alat dan mesin klining Lavor pro

• Water Cooled Motor :
Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.

Distributor alat-alat dan mesin klining Lavor pro

• Total Stop :
 Releasing the gun trigger the pump stops automatically avoiding element damages during the by-pass phase. Pulling the trigger, the high-pressure cleaner starts automatically. Max pump protection.

Distributor alat-alat dan mesin klining Lavor pro

• Low Voltage and Delayed Total Stop :
To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. Prevention, energy saving, top safety and pump longer life.

Distributor alat-alat dan mesin klining Lavor pro

• Motor Low Rotation Speed :
The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution.

Distributor alat-alat dan mesin klining Lavor pro


• Pressure Accumulator : 

The release of the gun trigger produces a strong counterstroke in the pump. This device amortizes this power with great benefit for the pump components and for the user, because it removes all the vibrations.

Showing 1–16 of 18 results